Hand tools and power tools

Starting and maintaining a coal forge fire – basic blacksmithing | List of the Best Power Tools

Are you searching for the subject Starting and maintaining a coal forge fire – basic blacksmithing? Are you looking to see what is a cold shut in blacksmithing? If that’s the case, please see it right here.

Starting and maintaining a coal forge fire – basic blacksmithing | Most-Buyed Power Tools.

Watch the video below

See latest prices

Images related to the topic what is a cold shut in blacksmithing.

Starting and maintaining a coal forge fire - basic blacksmithing
Starting and maintaining a coal forge fire – basic blacksmithing

See latest prices

In addition to viewing the article on the topic Starting and maintaining a coal forge fire – basic blacksmithing, you can see many other articles related to what is a cold shut in blacksmithing here:https://bestfloorscrubbermachine.com/hand-tools-and-power-tools/.

Information related to the topic Starting and maintaining a coal forge fire – basic blacksmithing.

Using a coal fired forge is a bit trickier than the gas forge, but isn’t anything to be afraid of either. Lets take a look at starting a fire in a typical coal fired forge. Most of these same procedures will work with coke or charcoal fuels as well.

Thank you for watching. Black Bear Forge is a small one person shop located in Southern Colorado.
If you would like to provide financial support to my YouTube channel visit

Find my shop on line at:

The following list provides just a few resources to help you find supplies and equipment for blacksmithing.

Blacksmithing and related activities can be hazardous. These videos are not a substitute for competent professional instruction. Your safety is your sole responsibility. Always use appropriate safety equipment including eye and ear protection when working in the shop. Follow manufactures safety guidelines for the use of all equipment. In the event something shown in one of these videos seems unsafe, it is up to you to make the appropriate changes to protect yourself. ..

See latest prices

we hope that this information brings you lots of value.

Thank you very much

Search related to topics Starting and maintaining a coal forge fire – basic blacksmithing.

what is a cold shut in blacksmithing

Wondershare Filmora,coal forge,coke forge,charcoal forge,coal fire,starting a fire,starting a coal fire,starting a coal forge,starting a coal forge fire,forge,forging,coal,coke,charcoal,forge fuel,fire pot,forge design,blacksmith,blacksmithing,blak bear forge,howto,how to,beginning,beginner,basic blacksmithing,technique,fundamentals,tricks of the trade,blacksmith shop,shop

#Starting #maintaining #coal #forge #fire #basic #blacksmithing

power tools storage
power tools home depot
power tools deals
power tools repair near me
power tools microsoft
power tools at walmart
power tools battery adapter
d i y power tools
power tools saw
b&q power tools

Robert Aka

Hello everyone, I'm Alva Feeney. As someone who likes to learn the best tools to help you with housework, gardening tools, electric tools, motorcycle polishing tools ... In this website I will share with you the tools that I feel the best

Related Articles

33 Comments

  1. Watering the coal somewhat concerns me. Depending on the quality of your coal, it can have a pretty substantial content of sulfur in it. Burning sulfur will already on it’s on produce sulfur dioxide which is bad enough, but adding water to the sulfur can actually begin to produce sulphuric acid.
    I would love it if someone would be able to debunk this, as it’s a concern of mine for my own forge.

  2. Thank you for this terrific video. I am a writer, and this gave me a lot of context for writing a forging scene 😊

  3. Sir thank you for teaching such awesome skills I used to be a Paramedic but due to a motor cycle accident I had to retire.
    I have been slowly starting to blacksmith.
    I'm using Anthracite…..its truly awful in South Africa we have really poor coal here.

  4. Your first prononciation of "Tuyère" is actually quite good ! :) Thanks for your videos, it helps a lot :)

  5. Great refresher video its been 36 years since I lite a coal forge back when I was in Farrier school in Langley BC. I just built a coal forge using a Waterloo hand crank blower that one of my former customers gave me for shoeing his horses. Thanks Again.

  6. How does that chimney draw so well when it’s not even above the fire? Is there a vent fan pulling the smoke and flames to chimney opening?

  7. I have a few questions. I presume that the coal you are using is bituminous coal rather than anthracite. Is anthracite a poor choice for forging? Is there a reason also to prefer buying and using coal rather than buying coke, and as far as the watering of the coal, is that done just once or continually as you forge? Lastly, how expensive is using coal or coke versus using propane or natural gas? How much do you use if you forge for say, four hours? Thanks for making these videos – they are very informative.

  8. I started the journey of blacksmithing about a year and a half ago. I scoured the internet for input using basic implements that I could scrounge. I noted the internet only amplifies the differences in opinions on the subject but fortunately I came across your channel about a year ago after making my forge from a large truck brake drum set inside a plate metal shallow table. As I have ventured along and made more than my share of mistakes, I find regardless of how many other people's videos I peruse, I continue to find the most helpful logical presentations and answers here with you. Your knowledge and humility in presenting subject matter is both excellent and inspiring. I'm 73 years old and my objective before I check out is to influence my 5 grandsons in their learning the technical and fun aspects of smithing with a view to weaning them off their addiction to computer games. Obviously this is a challenge but I'm thankful to have found your site and hope I can emulate your patient style. I just wanted you to know you are positively changing young lives of people you will never know (most likely) and wish you the best of health for a long life of sharing.  

    Thank you! Ken Weldon in Waukeenah, Florida.  

    PS. – The brake drum I started with was OK for exposure at the beginning but I will be getting a decent pot setup before the end of this year so we can get better heat control and not sticking our work down in the bottom at an angle as is necessary with the brake drum many times. I've also learned going back and re-watching your videos after some practice has enabled me to get new things out of even the most basic presentations that I just failed to see the importance in previously. We really don't appreciate what we don't know until we try to apply our limited understanding! Thanks again for your help and dedication in restoring this wonderful art form.

  9. This is great. I just got set up with a coal forge and didn't know where to start! This is just what I needed!

  10. So hey I just bought some coal and I was going to forge a railroad spike in my back yard firepit but I dont have a chimney do I need one or can I just wear a mask?

  11. Yes! This video has been IMMENSELY helpful! I've been trying to get my coal forge working properly, I seem to spend at least 80% of my time on the fire rather than the metal. This just answered my questions! Thank you so much! Take the like good sir, you've earned it. Also subscribed.

  12. Amazing!!! This is so helpful!!! Thank you so much for sharing and taking the time to make this!!!

  13. You need some good mep coal. The oil is so dense in it it's like a black diamond. Only thing is it's bigger chunks you have to bust it up but man it burns hot. If you ever need any email me at thevapnduck13@gmail.com. I have a huge abundance of it where I live in wv

  14. Having major problems with getting it to draft. Tried different diameter stack pipe..10" seemed to work the best, but still not like yours.

  15. Couldn't charcoal be used to start it? I don't have a lot of it, but I have enough that I've made that it could be used to start a fire.

  16. Cool video and I'm catching up fast. I've been watching a video or two a day for a couple of months now. My questions are 1) what do you do with the clinker once its cooled? 2) have you ever taken a magnet to the floor of your shop just to see what gets pulled out of the dirt?

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button